November 11-12, 2025, Almaty, Kazakhstan
XII International Annual Conference
"Industrial Technologies and Engineering" (ICITE 2025)
Organizers:
University of Medical Sciences (Istanbul, Türkiye), South Kazakhstan University named after M. O. Auezov (Kazakhstan)
Alma-Ata University of Energy and Communications named after Gumarbek Daukeev (Kazakhstan)
Days
Hours
Minutes
Seconds
History of the conference
The ICITE 2025 conference is being held for the eleventh time this year, continuing the tradition of bringing together leading scientists, researchers and specialists in the field of industrial technology and engineering. Particular attention is paid to the introduction of advanced scientific achievements into practical activities aimed at increasing the efficiency and sustainable development of industrial processes.
1. Earth Sciences: Geology, Geography, Climatology, Meteorology, Hydrology, Oceanography
2. Environment & Natural Resource Management: Soil Science, Biodiversity, Resource Management, Environmental Toxicology.
3. Energy and Renewable Resources:
4. Energy Engineering, Renewable Energy, Energy Efficiency, Decarbonization.
5. Environmental Health: Environmental Impact on Health, Pollutant Assessment, Food Security.
About the conference
Conference sections:

The main goal of ICITE 2025 is to promote progress in the field of industrial technology and engineering, as well as provide a platform for discussing current problems and finding new ways to solve them. The conference aims to stimulate the development of scientific research, as well as promote innovation in industry and society.

IMPORTANT DATES:
August 1, 2025 - Information letter about the conference
October 15, 2025 - End of registration and acceptance of articles
November 1, 2025 - Completion of review and publication of the conference program;
November 11-12, 2025 - The conference
Keynote Speakers
  • Dr. Manoj Kumar
    National Institute of Technology, Delhi
    Dr. Manoj Kumar is a renowned expert in advanced manufacturing techniques. He holds a Ph.D. in Mechanical Engineering and has extensive experience in research and teaching at the National Institute of Technology, Delhi. His work primarily focuses on additive manufacturing, automation, and smart manufacturing systems. He has contributed to numerous high-impact journals and conferences, establishing himself as a leading figure in his field.
  • Dr. Leila Hussein
    National research centre, Energy Research Institute, Alexandria University, Egypt
    Dr. Leyla Hussein is a leading researcher in renewable energy technologies. She earned her Ph.D. in Electrical Engineering from Alexandria University and has been instrumental in several projects aimed at enhancing solar power efficiency. Dr. Hussein's work has been recognized with several awards in the field of sustainable energy.
  • Dr. José Silva
    Master's and Doctorate Program in Medicine, Federal University of Viçosa, Brazil
    Dr. José Silva is an expert in medical research with a focus on interdisciplinary applications of biomedical sciences. He holds a Ph.D. in Medical Sciences and is a faculty member in the Master's and Doctorate Program in Medicine at the Federal University of Viçosa. His research interests include translational medicine, public health, and the integration of modern diagnostic techniques in clinical practice. Dr. Silva has authored numerous publications and contributed to various health development initiatives in Brazil.
Conference Program
November 25-26, 2024
08:00 – 08:30
08:00 – 08:30
Conference opening
Conference Hall 1, Auezov South Kazakhstan State University
08:30 – 09:00
08:30 – 09:00
Opening Speech
09:00 – 10:00
09:00 – 10:00
title of the report is to be determined
Keynote Speaker, 1st
Dr. Manoj Kumar - National Institute of Technology, Delhi
10:00 – 11:00
10:00 – 11:00
title of the report is to be determined
Keynote Speaker, 2nd
Dr. Leila Hussein - National research centre, Energy Research Institute, Alexandria University, Egypt
11:00 – 12:00
11:00 – 12:00
title of the report is to be determined
Keynote Speaker, 3rd
Dr. José Silva - Master's and Doctorate Program in Medicine, Federal University of Viçosa, Brazil
12:00 – 12:30
12:00 – 12:30
Coffee Break
12:30 – 14:00
12:30 – 14:00
Section 1. Earth Sciences and Environment & Natural Resource Management

14:00 – 15:30
14:00 – 15:30
Section 2. Energy and Renewable Resources
15:30 – 17:00
15:30 – 17:00
Section 3. Environmental Health: Environmental Impact on Health, Pollutant Assessment, Food Security.
17:00 – 18:00
17:00 – 18:00
Poster Session
Organization committees
Organization committees

1. Science and technology in mining and processing


  1. Marzband Mousa, University of Northumbria, Newcastle, United Kingdom
  2. Maria Ciurea, University of Petroșani, Petroșani, Romania
  3. Ştefan Ţălu, Assoc. Prof. PhD., The Technical University of Cluj-Napoca, Romania
  4. Y. Nifontov, Dr.Eng.Sc., Professor, Scientific Research Laboratory for Electromagnetic Safety, Russia, St. Petersburg
  5. R.S. Abiev, Dr.Eng.Sc., Professor, St. Petersburg State Technical University, Russia
  6. G.F. Michot, PhD, Professor, University of Lorraine, France
  7. V. K. Bishimbayev M., Dr.Eng.Sc., Professor, Academician of NAS, Auezov. SKSU, Kazakhstan
  8. E.S.M. Negim, Dr. PhD, Faculty of Science and Engineering, University of Wolverhampton, Wolverhampton, WV1 1LY, United Kingdom
  9. O. Ivakhnenko, Dr. PhD, Heriot-Watt University, prof. of department Petroleum Engineering, Great Britain.
  10. I. Petropavlovsky, Dr.Eng.Sc., Professor, D.I.Mendeleyev Russian Chemical and Technological University, Moscow, Russian Federation.
  11. V. Malyshev, Dr.Eng.Sc., Professor, Zh.Abishev Chemical and Metallurgical Institute, Karaganda, Kazakhstan
  12. G. Kagramanov, Dr.Chem.Sc., Professor, D.I.Mendeleyev Russian Chemical – Technological University, Moscow, Russian Federation.
  13. V.P. Meshalkin, Dr.Eng.Sc., Professor, D. Mendeleyev University of Chemical Technology of Russia Russia.

2. Computer Sciences and Information Technologies


  1. Nazarov Dmitry, Ural State University of Economics, Yekaterinburg, Russia
  2. А.М. Brener, Dr.Eng.Sc., Professor, M. Auezov SKSU, Kazakhstan
  3. V. M. Tyutyunnik, Dr.Eng.Sc., Professor, President of the international information Nobel center (IINC), Russia

3. Ecology and nature management


  1. M. Nursoy, Dr., Professor, Istanbul Gelisim University, Turkey.
  2. M.I. Satayev, Dr.Eng.Sc., Professor, Corresponding Member of NAS, M. Auezov SKSU, Kazakhstan

4. Renewable energy and energy saving technologies


  1. E. Kenig, Dr., Professor, University of Paderborn, Germany.
  2. R. Abiev, Dr.Eng.Sc. St.Peterburg State Technological Institute (Technical University), Russian Federation.
  3. S.V. Gribkov, Can.Eng.Sc., Ph.D., Associate Professor, Corresponding Member of RIA, Science and Engineering Center "VINDEK", Russia
  4. Dr. Saifullah Khalid, IEEE Senior Member, Visiting Researcher, Nanyang Technological University, Singapore
  5. Dr. Lazar Z. Velimirovic, Mathematical Institute of the Serbian Academy of Sciences and Arts,
  6. Prof. Dr. Fateh Mebarek-Oudina., Skikda University, Algeria
  7. Radu Stanciu, University Politehnica of Bucharest, Bucuresti, Romania
  8. Prof. Houda Chihi, Innov'COM Laboratory of Sup'COM, Tunisia
  9. Prof. Ouarda ASSAS, Faculty of Technology, University of BATNA 2, Algeria

5. Nano-, bio and green technologies for a sustainable future


  1. M. Baklanov, Dr., Inter University Research Centre of Microelectronics and Nanotechnologies (IMEC), Leven, Belgium.
  2. N. Slavinskaya, Dr., Professor, Institute of Technologies of Burning at the German Space Agency, Germany.
  3. A. Buranov, Dr., Company “Kok technologies Inc.”, Canada.
  4. M. Farakhov, Dr.Eng.Sc., Professor, LLC Engineering – promotional center “Inzhechim”, Kazan, Russian Federation.
  5. P. Prokopovich, PhD, Professor, Cardiff University, United Kingdom
  6. M.S. Satayev, Dr.Eng.Sc., Professor, M. Auezov SKSU, Kazakhstan
  7. B. Zh. Mutaliyeva, Can.Eng.Sc., Ph.D., Associate Professor, M. Auezov SKSU, Kazakhstan
  8. A.A. Mirzayev, Can.Eng.Sc., Ph.D., Associate Professor, M. Auezov SKSU, Kazakhstan

6. Intellectual potential


  1. A. Desyatov, Federal State Unitary Enterprise “Keldysh Centre”, Moscow, Russian Federation.
  2. N. Kurakova, Dr. Biological Sciences, prof., Russian Academy of Medical Sciences, Director, Moscow, Russian Federation.
  3. A.M. Sarsenbi, Dr. Ph-math. Sc., M. Auezov SKSU, Kazakhstan
  4. A.M .Esirkepova, Dr. Econ. Sc., Professor, M. Auezov SKSU, Kazakhstan
  5. M. K. Seidakhmetov, Dr. Econ. Sc., Associate Professor, M. Auezov SKSU, Kazakhstan
  6. K. K. Nurashova, Dr. Econ. Sc., Professor, M. Auezov SKSU, Kazakhstan
Stages of accepting an article for publication
1
Registration process
You fill out the registration form and attach your article to this site.
2
Technical verification
Automatic article verification takes 48 hours.
In case of refusal, we will send it to You for revision.

3
Review process
If the article is written in English, the quality of the English language is checked within
24 hours.

If the article isnt written in English,
we review it within 10 days.
4
Approval and payment
After passing all the stages of verification when your article is approved, you make a payment according to the rates.
Stages of accepting an article for publication
1
Registration process
You fill out the registration form and attach your article to this site.
2
Technical verification
Automatic article verification takes 48 hours.
In case of refusal, we will send it to You for revision.

3
Review process
If the article is written in English, the quality of the English language is checked within
24 hours.

If the article isnt written in English,
we review it within 10 days.
4
Approval and payment
After passing all the stages of verification when your article is approved, you make a payment according to the rates.
Peer Review & Publication Ethics
The review procedure:

Manuscripts that have not previously been published in other publications, have scientific novelty, are relevant to the theme of the conference and are of theoretical and practical significance are accepted for consideration.
All works undergo a blind review procedure by at least two reviewers - experts in the field of research.

Review criteria:
1. Does the article contain enough new material to warrant publication?
2. Is the article scientifically sound and not misleading?
3. Does the article have a general introduction?
4. Is the article clearly written, concise and understandable?
5. Do the topic and writing style correspond to the quality of Web of Conferences publications?
6. Is the volume of the article sufficient?
7. Should handwritten text in Russian/English be edited?
8. Will the article have interest and influence in the scientific community?

The organizer bears full responsibility and authority to accept the article for publication or reject it. However, the final decision is made by the Publisher. The editors of Web of Conferences have equal authority not to accept an article due to too low quality or non-compliance with the rubric.
If you send an article in English, then before reviewing it is checked for the quality of translation by native speakers
Publication ethics:

The ICITE Conference Series Organizing Committee adheres strictly to standards of publishing and academic integrity. The main documents on which the journal's editors rely are the developments of the Committee on Publication Ethics, Great Britain. Editors, reviewers and authors are required to follow publication ethics and strictly adhere to the rules described in the E3S Web of Conferences journal: https://www.e3s-conferences.org/images/stories/eth...

Serious violations (such as data falsification or plagiarism) are taken seriously and subject to further investigation. If any violation is confirmed, the organizing committee will remove the manuscript from publication at any stage. The manuscript is not sent to the E3S Web of Conferences journal, such a manuscript is not published, the registration fee paid for this manuscript is not refundable.
Before publication, E3S Web of Conferences staff randomly screens papers from each scientific conference using a powerful text comparison tool: iThenticate.

No amendments will be made after articles are published in the E3S Web of Conferences journal.

All works are checked in the anti-plagiarism system.
The minimum originality of the article is 80%.
ARTICLE SUBMISSION REQUIREMENTS
1. TOPIC RELEVANCE
  • The article must strictly correspond to one of the conference topics.
  • Materials outside the scope of the conference will not be accepted.
2. LANGUAGE
  • Articles must be written in English or Russian.
3. ARTICLE STRUCTURE
Each article must contain the following sections:
  1. Introduction
  2. Materials and Methods
  3. Results and Discussion
  4. Conclusion
  • The "Acknowledgments" section is optional.
4. ARTICLE LENGTH
  • The minimum article length is 20,000 (without references), approximately 5 pages following the publisher’s template.
5. AUTHORSHIP
  • The maximum number of authors is 5.
  • If the article exceeds 35,000 characters, the number of authors may be increased.
  • Please note, that the number of authors must not be more than three, he number of articles that the author may publish in one issue must not be more than two
6. REFERENCES
  • The number of references must be between 10 and 20.
  • If the article exceeds 35,000 characters, the reference list may be extended.
  • Self-citation is strictly prohibited (authors must not cite their own previous works).
  • Citations of a single author must not exceed one reference.
  • All references must be relevant to the research topic.
  • Reference list updates are mandatory:
  • At least 70% of sources must have been published within the last 5 years (except for fundamental studies).
  • Excessive citation of a single journal or author is not allowed.
  • Preference should be given to peer-reviewed international journal articles.
7. FORMATTING REQUIREMENTS
  • Articles must be prepared in Microsoft Word (2007 or later).
  • All figures, tables, and diagrams must be in English.
  • Plagiarism check: minimum originality of 80% (excluding references).
  • Previously published materials are prohibited (except within a 15% limit for scientific necessity).
8. ABSTRACT REQUIREMENTS
  • The abstract must contain at least 100 words.
  • The abstract should engage the reader, summarizing the article content, not just conclusions.
Papers by template
To participate in the ICITE 2025 conference,
you must fill out the registration form and attach an article designed according
tothe template.

You can also order a template for your article from us, according to our rates
Papers by template
To participate in the ICITE 2025 conference,
you must fill out the registration form and attach an article designed according
tothe template.

You can also order a template for your article from us, according to our rates
Conditions and cost of participation in the conference
Arrangement fee:
350€/$
* Additional information
Design of the article on the template
50€/$
* Additional information
The cost of translation into English:
150€/$
Registration form
Please, attach your article
(The file format must match doc/docx/rtf.
The file name of the article must correspond to the last name of the corresponding author
Example: Smith.doc / Smith.doxc)
Do you need a translation of the article in English?
(Prices can be found in the pricing plans)
Do you need design of the article according to the template?
(Prices can be found in the pricing plans)
How did you know about us?
Contact us:
E-mail:
icite2025@ide-rus.ru
Phone:
+7 (343) 382-555-1
WhatsApp, Telegram
+7 (999) 340-555-1
Contact us:
E-mail:
icite2025@ide-rus.ru
Phone:
+7 (343) 382-555-1
WhatsApp, Telegram
+7 (999) 340-555-1